How Many Pavers for a 10x10 Patio? (2026 Guide)

A 10×10 patio is 100 sq ft — here is the count

A 10×10 ft patio is exactly 100 sq ft, and that number never changes. What changes is the footprint of one paver: the count is always 100 divided by the area of a single paver, rounded up.

The buy column adds 10% and rounds up to whole pavers: 100 × 1.1 = 110, 57 × 1.1 = 62.7 → 63, 45 × 1.1 = 49.5 → 50, and 25 × 1.1 = 27.5 → 28. That allowance covers a few cut pavers, units broken in delivery, and spares for later repairs.

Worked example: 12×12 in pavers on a 10×10 patio

Lay 12×12 in pavers on the 10×10 ft patio and a clean grid takes no cut pavers. Convert the patio to inches: 10 ft = 120 in each way. Each 12×12 in paver covers exactly 1 sq ft, so the field is 10 pavers wide by 10 pavers long: 10 × 10 = 100 full pavers.

Real-world edges change that math slightly. If you set true ¼–½ in joints, the 9 joints in each 10-paver row add roughly 2.25–4.5 in, so one paver per row gets trimmed to hold the 10 ft dimension — about ten cut pavers across the patio. Stagger (offset) the rows in a running bond so the vertical joints never line up: starting every other row with half a paver is what gives the pattern its strength, and those end cuts are exactly where most of the waste goes. Where the patio meets a house wall, leave a small expansion gap and hide it under the sill; along planting beds or borders, set the outer row in an aluminum edge restraint so it never drifts. Paving a narrow path instead? The count and pattern differ — see how many pavers a 4×8 walkway needs.

The same math scales straight up: a 12×12 ft patio is 144 sq ft and takes 144 of the same 12×12 pavers — see how many pavers a 12×12 patio needs before you settle on the footprint.

Three details that change your order

• Plan ¼–½ in joints. Polymeric sand locks the joints so pavers stay put; hairline-butted joints let the sand out and chip edges. Joint width is also why the last paver in a row usually gets trimmed.
• Spend on the base, not the surface. A patio that lasts needs 4–6 in of compacted gravel topped with about 1 in of leveling sand — the standard paver-base gravel-and-sand build. Base material does not change your paver count, but dig depth and gravel volume do affect cost; see how much gravel and sand a paver base needs.
• Diagonal or curved layouts eat 5–10% more. A perfectly square patio wastes little, but pavers set on the diagonal or around a radius leave wedges you cannot reuse — add another 5–10% (roughly 5–10 pavers on 100 sq ft) on top of the 10% in the table.

Estimate your paver order →