How Much Sod for 1/4 Acre? (2026 Guide)

Acres to square feet: the 1/4-acre conversion

Land is bought and sold by the acre, but sod is priced by the square foot, so the first step is a conversion. One acre is 43,560 sq ft. Divide by four and a quarter acre is 43,560 ÷ 4 = 10,890 sq ft — roughly the size of a 104 × 104 ft square, or exactly a 66 × 165 ft rectangle.

For reference, an eighth acre is 5,445 sq ft, a half acre is 21,780 sq ft, and a full acre is 43,560 sq ft. If your yard isn't a clean fraction of an acre, measure it in feet and multiply length × width instead.

Sod rolls and pallets: the sizing units

Two units matter when you order sod. A standard roll covers 10 sq ft, and a pallet holds roughly 450–500 sq ft of sod depending on the farm — the examples below use 450 sq ft. Estimate rolls by dividing your area by 10, and pallets by dividing by 450.

How much sod for common lot sizes

Counts below use 10 sq ft per roll and 450 sq ft per pallet:

Roll counts above are the exact coverage with no waste. Add a ~10% buffer for trimming, curved edges and seams — for a quarter acre that means ordering about 1,200 rolls instead of the exact 1,089. Pallet counts already round up to full pallets, which is how sod is actually sold and delivered.

Worked example: ordering sod for a quarter acre

Step 1 — the area. 43,560 sq ft ÷ 4 = 10,890 sq ft. Measure the real lawn before you order; if it isn't a full quarter acre, put your actual length and width in the sod calculator.

Step 2 — the rolls. 10,890 sq ft ÷ 10 sq ft per roll = 1,089 rolls.

Step 3 — add waste. Trimming around beds, curbs and sprinkler heads, plus seam mistakes, eats about 10%: 1,089 × 1.10 ≈ 1,198 rolls. Round to about 1,200 and you have the number for a loose-roll order.

Step 4 — by the pallet. Sod ships on pallets of roughly 450–500 sq ft. At the 450 sq ft example, 10,890 ÷ 450 ≈ 24.2, so expect to order about 25 pallets — roughly 11,025 sq ft of sod delivered, which covers the lawn with margin to spare for trimming and spot repairs.

Ordering tips for a quarter-acre install

• Prep the soil first — grade and level the yard, clear rocks and debris, and water it a couple of days ahead so the rolls land on a smooth, ready bed; sod that sits on rough ground dries unevenly and heals slowly.
• Lay it the same day and water right away — stacked rolls yellow within hours in the sun, so start early, stagger the seams like brickwork, and water each section the moment it's down.
• Order by the pallet — a quarter acre needs about 25 pallets anyway, and pallet pricing is cheaper per sq ft than loose rolls while avoiding short-count deliveries; schedule the drop close to your install day.

Estimating a different project? For the general method behind these numbers, read how much sod do I need, or compare costs against starting from scratch with how much grass seed do I need.

Calculate your exact sod order →