How Much Gravel for a 10x10 Patio? (2026 Guide)
A 10x10 ft gravel patio needs about 42 cu ft of gravel: a 25 cu ft base of 3/4-in crushed stone plus a 17 cu ft pea gravel surface - roughly 1.5 cubic yards or 2-2.5 tons (3-in base + 2-in surface).
The two-layer breakdown
A gravel patio is not one big pile of stone: it is a 3-in base of 3/4-in crushed stone topped with a 2-in surface of pea gravel. The crushed base locks together, drains fast and carries the load; the pea gravel layer is the finished surface you sit and walk on. On 100 sq ft the layers add up like this.
| Layer | Depth (ft) | Volume at 100 sq ft | Cubic yards | Tons (~1.5/yd³) |
|---|---|---|---|---|
| Base - 3/4-in crushed stone, 3 in | 0.25 | 25 cu ft | 0.93 yd³ | ~1.4 |
| Surface - pea gravel, 2 in | 0.17 | 17 cu ft | 0.62 yd³ | ~0.9 |
| Total | - | 42 cu ft | 1.55 yd³ | ~2.3 |
The tonnage column uses a typical 1.5 tons per cubic yard. Real density runs about 1.4-1.6 tons/yd³ depending on stone gradation, moisture and how tightly it settles, so confirm the weight with your supplier when you order. Adding landscape fabric between the soil and the base changes nothing in these totals - the fabric is a sheet, not a layer of stone.
The math for a 10x10 patio, step by step
Every gravel order is the same formula: area in sq ft x depth in ft = volume in cu ft, then divide by 27 for cubic yards. For a 10x10 patio the area is 100 sq ft.
- Base layer (3 in = 0.25 ft): 100 x 0.25 = 25 cu ft; 25 / 27 = 0.93 cu yd.
- Surface layer (2 in = 0.167 ft): 100 x 0.167 = 16.7 cu ft; 16.7 / 27 = 0.62 cu yd.
- Total: 41.7 cu ft = 1.55 cu yd of gravel for the patio.
Suppliers sell loose gravel by the cubic yard or by the ton. At 1.4-1.6 tons/yd³, 1.55 cu yd weighs about 2.2-2.5 tons, so order 1.5-2 cu yd (about 2.5 tons) to cover settling, spillage and the supplier's delivery minimum. For a much bigger spread, the how-much-gravel-for-a-driveway guide runs the same numbers at driveway scale, and you can size any patio instantly with the gravel calculator.
Dig out the site, then build it back up
Get the excavation right and the patio stays put; skip it and the gravel slowly disappears into the soil.
- Excavate about 4-5 in deep so the 3-in base and 2-in surface finish level with the lawn, and the loose stone has a lip to stay inside.
- Lay landscape fabric on the dug-out soil before any gravel. It stops weeds from pushing up through the patio and does not add to the gravel total.
- Ring the area with edging - steel, plastic or concrete border. Round pea gravel migrates sideways easily, and a hard edge is what stops it spilling onto the yard.
- Hold the pea gravel surface at about 2 in, not more. A thick loose top layer feels shifty and hard to walk on; 1.5-2 in is enough to cover the base and stay comfortable.
Gravel patio vs. a paver base: different numbers
This guide sizes a patio finished in loose gravel, where the pea gravel surface is the top of the build. If you are laying pavers instead, the surface layer disappears and the job is a crushed-stone bed sized for the pavers above it - see paver base gravel and sand for that calculation. And if you are still choosing a surface, concrete vs. pavers patio cost compares the main alternatives to gravel.
FAQ
How much gravel does a 10x10 patio need?
About 1.5 cubic yards of gravel - 2 to 2.5 tons. On 100 sq ft, the 3-in crushed-stone base is 25 cu ft (0.93 cu yd) and the 2-in pea gravel surface is 16.7 cu ft (0.62 cu yd). Order roughly 1.5-2 cu yd, or 2.2-2.5 tons by weight, rounding up a little for settling.
How do I split the base and surface layers?
Put down about 3 in of 3/4-in crushed stone first - it locks together, spreads the load and keeps the patio level - then top it with about 2 in of pea gravel, the layer you see and walk on. Go up to 4 in of base on soft ground, but keep the pea gravel surface around 1.5-2 in so it stays comfortable underfoot.
Can I lay gravel directly on the ground?
Not really. On bare soil the gravel sinks into mud, dips underfoot and weeds push through within a season. Excavate about 4-5 in, lay landscape fabric across the soil, then add the crushed base and pea gravel so the patio drains and holds its level.
Need a different size?
Our free calculators give you the exact answer in seconds.